Mixing with EQ is no doubt one of the most complicated things to do as a DJ. You have already recorded the best performance, and now you are just sitting there looking at your software equalizer knowing the time has come to face the inevitable. However, all of such settings and knobs are staring back and smirking, challenging you to try to understand what they do. Fret not. In this post, we will inform you of everything about the art of EQ.
A lot of DJs here do not concentrate too much on getting involved with their EQing. That’s especially true, particularly if you cannot put together a stable mix without even employing it.
What is EQ by the way?
In case you didn’t know yet, EQ or equalization is one of the most popular types of audio processing in music production. It allows you to change the volume range of frequencies in a sound. That, in turn, enables you to cure a sound. This is accomplished by removing unwanted frequencies to balance out the sounds you feel are insufficient.
How Does EQ Work?
For audio experts out there, equalization is a standard part of the regular workflow when mixing or recording sound. Nonetheless, for newbies and people who are new to the principle of EQ, it could be tough to understand where to begin.
Most individuals do not realize that they experience and utilize basic types of EQ almost every day. If you adjust the treble or bass on the stereo of your vehicle, you are actually using equalization to make your ties sound as you like them to. That’s also similar to selecting vocal booster or bass on the music settings of your phone.
In short, EQ is the procedure of changing or boosting particular frequencies on a specific audio signal.
Every single sound you hear is composed of a wide array of sound frequencies. These are measured in hertz. Humans can hear frequencies as low as 20 hertz, right through to the high 20,000 hertz that is equivalent to 20 kilohertz.
A frequency that is between 20 Hz and 500 Hz would be known a brass. While those that fall in 500 Hz to 4 kHz are called as mid. Ultimately, anything that goes beyond the latter up to 20 kilohertz is referred to as treble.
When you record, external factors like the mic you’re using or even the room you’re working, it could affect the quality of your sound. If you listen back to a guitar or voice recording, you might find that the audio has higher frequencies than you plan to have. You can utilize equalization to lower them. They can return the audio signal a bit closer to its average state.
Another example will be if you record a bass guitar. You identified that the recorded signal doesn’t have enough bass or low frequencies as you’d wanted. Those can be improved and boosted by EQ too.
You need to bear in mind that there are a plethora of EQ methods accessible. All of them will aid you to contour your audio signal; therefore; you need to make sure you utilize the best form to fit your requirements. Some of them include Self EQ, Graphic EQ, and Parametric EQ.
As with various music production tools, EQ could be utilized creatively. EQ is, no doubt a strong sonic device. However, it’s widely known that better outcomes will be accomplished if you make more effort getting the best sound at the source. That will lend you a better starting point before you have even started to apply equalization.
For better understanding about EQ, DJing or improve your DJing skills, do not hesitate to take DJ courses online or work with a DJ courses provider in London.