You move into your new home, and the kitchen countertop outlets don’t work. You flip on the light and find that there is no power coming through.
How are you going to fix these electrical problems yourself? This can get you thinking about your electrical system.
Most people have a basic knowledge of electrical circuits in their homes. However, there may be some electrical issues that you may not know of as common issues.
To learn more about home electrical problems, keep reading below to get a full breakdown of everything that you need to know.
Electrical Surges and Dips
Surges occur when there is a sudden increase in voltage. It makes the current too strong and causes the power to spike. Dips are the opposite, where there is an abrupt decrease in the current’s strength, resulting in flickering lights, humming noises and power cuts.
Surges and dips can damage a home’s electrical system and long-term exposure can lead to decreased performance and functionality of electrical appliances. To protect against electrical surges or dips, surge protectors and circuit breakers should be installed by a qualified best electrician.
Surge protectors reduce currents and protect against expensive damage to appliances and electrical systems. Circuit breakers will shut off electricity in cases of electrical overload and prevent any further damage.
Flickering Lights
Common home electrical problems related to flickering lights are usually due to a loose connection between the bulbs and their holders. Loose contacts in the light switch, in the lamp holder, or a failing light fixture. Flickering often happens when these connections become lax and allow electricity to come and go.
It creates a series of flickering or pulsing lights. It can also occur if the device or circuit being used is overloaded with too many appliances, which causes the voltage to drop, resulting in a flickering light.
Frequent Light Bulb Blowouts
Frequent light bulb blowouts are one of the most common home electrical problems encountered by homeowners. This problem can become a nuisance if the light bulbs are constantly needing to be replaced and is an expensive problem if your lights are on a dimmer switch.
This can happen because of an overloaded electrical circuit or loose wiring that can result in short circuits. Another potential issue is when there is a voltage spike, which is when the voltage temporarily increases to a level that is significantly higher than the one the light bulb is designed to handle. This can cause the filament in the bulb to expand and contract, which results in it burning out.
Damaged Extension Cords
Extension cords are used to provide temporary power to devices or appliances as a substitute for hardwiring. When an extension cord becomes damaged with fraying wires, exposed strands, or loose fittings, it increases the likelihood of fire and shock hazards.
Inspect your extension cords regularly to check for any physical damage, like cracks or exposed wires. If extensive damage is present, the cord should be recycled and replaced with a new one. To help extend the life of an extension cord, use cord covers to protect them from physical damage and avoid running them under carpets or furniture.
Tripping Circuit Breakers
Tripping circuit breakers are most often caused by an overabundance of electric flow coming into a room. This electric flow travels through the circuit breaker and if the breaker isn’t equipped to handle the large amount of flow, it will trip and cut off the power to the entire circuitry.
If the breaker continues to trip, it can be a sign that the specific electronic needs to be replaced or that the wiring needs repair. Therefore, if a circuit breaker trips and cannot be reset, it’s best to find a certified electrician to investigate and correct the problem.
Warm Outlets and Switches
This usually happens because of a loose connection in the wiring or an overloaded circuit. It is common for people to plug too many items into a single outlet or to use appliances that draw too much power, leading to circuits becoming overloaded and causing them to heat up.
Outlets and switches should never be warm to the touch. If they do, it is important to have an electrician inspect and repair the issue.
Electrical Shocks
Electrical shocks can be one of the most dangerous home electrical problems. The most common symptoms of an electrical shock include a feeling of numbness and temporary paralysis. Shock can sometimes cause cardiac arrest and can be very dangerous.
The best way to avoid an electrical shock is to ensure that the wiring in a home is maintained properly and checked for loose or frayed wiring annually. If a home is older, having it inspected for potential electrical faults by a certified electrician is also a good idea.
High Electric Bill
Appliances that are malfunctioning or in need of repair can draw power and increase your monthly bill. Short circuits or damaged wiring can cause a significant spike in your bills.
This can also be the result of outdated or inefficient appliances or devices that have the potential to draw much more electricity than necessary. Checking your home’s wiring and upgrading appliances is a good way to ensure your electricity bills stay as low as possible.
Dealing With Common Home Electrical Problems
Common home electrical problems are more common than you may think and can pose a number of threats. Keep your home safe and ensure that it is correctly wired by getting in touch with an electrician.
Professional help will ensure that all of your electrical problems are correctly resolved and your home is back to safety. Contact an electrician to ensure your home is safe and secure from any electrical-related hazards!
Looking for more home repair tips? We’ve got them. Check out our articles now for the best in home improvement knowledge.